CBT Mode | 2024 BECE Basic Technology Objective

The right end view of the orthographic projection below is ________.

From the diagram below, if x = 45° and y = 45°, the angles are said to be _________.

Which of the axes below is oblique?

Which of the following drawing instruments is used for transferring measurement?

Which of the following scales will produce the largest view of an object?

The tee square is a drawing instrument used for

The axes of isometric projection should be at __________.

A quadrilateral that has four equal sides at right angles to each other is

In board practice, tee square can be used in conjunction with set square to draw _______ line.

The removal of plants and unwanted materials on site is __________.

The roof type shown below is

Projects to be mass produced must be accompanied with the following except __________.

Paper is made from wood _________.

The machine used in cutting timber across the grain is

Which of the following is a property of wood?

Which of the following equipment is classified as an impelling tool?

The method of reducing moisture content in wood is ________.

The complete angle of rotation of a machine gear is

Simple maintenance carried out on a television is

Which of the following equipment is a non-hydraulically operated device?

What is the main function of a Global Positioning System device?

The first action to be taken in a case of severe bleeding is to  _________.

The equipment used to protect the head against injury in a workshop is

Which of the following materials is usually placed in a first aid box?

Metal stiffness is also known as __________.

The metalwork operation that is not required for making metal stools is ________.

The part labelled X in the diagram below represents ________.

The purpose of resin flux in soldering operation is to ________.

The cutting part of a drill bit is _________.

Cutleries are usually made of _________.