Steps In Drawing Title Block With Dimensions
To draw the title block, follow the steps below:
1. With the aid of a pair of compasses, measure a rectangular box of 40mm × 100 or 120mm, starting at the lower right corner of your borderline.
2. With the aid of the compasses at a 10mm radius, cut the 40mm side into four equal parts.
3. With the aid of the T-square, rule the four marks from one end to the other of the title block to complete the drawing.
Filling the Title Block: The following information is required in the title block:
Draw a Title Block with dimensions as specified above;
JSCE 2019 Examination Past Question:
Draw on the sheet provided, borderlines and title block with the following information
i. Your name
iii. Examination number
iv. Scale used
TKS sir.but sir pls can u teach me how to do isometric drawing
Have you checked this out? – isometric drawing
A video of this would have been better but tenks