-
Geometric Construction | Week 15 Topics1 Quiz
-
Construction of Angles & Circles | Week 26 Topics1 Quiz
-
Construction of Triangles | Week 35 Topics1 Quiz
-
Quadrilaterals | Week 42 Topics1 Quiz
-
Construction of Quadrilaterals | Week 53 Topics1 Quiz
-
Polygons | Week 63 Topics1 Quiz
-
Plane Figures | Week 73 Topics1 Quiz
-
Enlargement And Reduction of Plane Figures | Week 82 Topics
-
WoodWork Machines | Week 92 Topics1 Quiz
-
Care & Maintenance of WoodWork Machines | Week 101 Topic1 Quiz
Lesson Progress
0% Complete
Topic Content:
- Maintenance of WoodWork Machines
Maintenance of woodwork machines simply refers to the care of machines and machine tools so as to prolong their efficiency and ease of use.
Below is a list of woodwork machines and the steps you need to take to maintain them:
| S/N | Woodwork Machines | Care and Maintenance |
| 1. | Portable power tools (Belt sander, hand drill) | i. Check to be sure the guards are not damaged. ii. Check and ensure electric cables are not broken to avoid electric shock. iii. Keep in a safe place after use, away from moisture. |
| 2. | Circular saw | i. Clean regularly with a brush to remove sawdust. ii. Blunt blades should be sharpened or replaced if broken. iii. Store in a dry place or a toolbox to prevent rust. |
| 3. | Surface planer | i. Clean regularly to remove sawdust and lubricate moving parts. |
| 4. | Drill press | i. Clean surfaces to remove dust and moisture. ii. Lubricate the drill chuck regularly. iii. Check and replace worn-out belts. iv. Remove wood chippings during and after every operation. |
| 5. | Wood lathe | i. Clean the tapers, the headstock, the tailstock, and the bed regularly to remove chippings, shavings, dust, and moisture. ii. Lubricate the moving parts. |
Evaluation Questions:
State one way by which the following machines can be maintained:
a. Wood lathe
b. Surface planer
c. Drill press
d. Circular saw
e. Belt sander